Skip to main content

Free Shipping on Domestic Orders $75+

How to Unclog a Feeding Tube

Medical Equipment
Neither iFixit nor this repair guide is endorsed by or affiliated with the medical device manufacturer.

What you need

  1. How to Unclog a Feeding Tube, How to Unclog a Feeding Tube: step 1, image 1 of 1
    • Test your tube. Use a 35ml plunger to test your tube, just to confirm it is clogged.

    • Exert a decent amount of force.

    Ask FixBot

    Add Comment

  2. How to Unclog a Feeding Tube: step 2, image 1 of 1
    • Massage the tube. Roll the tubing in between your fingers and “massage” it.

    • The clog may be in the external tubing and doing so may break it up.

    Ask FixBot

    Add Comment

  3. How to Unclog a Feeding Tube: step 3, image 1 of 1
    • Switch to a smaller plunger. Start using a 10ml plunger.

    • The smaller the plunger, the more pressure is exerted.

    Ask FixBot

    Add Comment

  4. How to Unclog a Feeding Tube: step 4, image 1 of 1
    • Flush hot water. Fill your 10ml plunger (and extension tubing, if applicable) with hot water. As hot as you can safely tolerate. Use this to flush your tube.

    Ask FixBot

    Add Comment

  5. How to Unclog a Feeding Tube: step 5, image 1 of 1
    • Pulsate. Pulsate the 10ml plunger back and forth, in quick motion. This helps to dismantle the clog.

    Ask FixBot

    Add Comment

  6. How to Unclog a Feeding Tube: step 6, image 1 of 1
    • Flush a combination of hot water and meat tenderizer. If your tube is still clogged, fill your 10ml plunger (and extension tubing, if applicable) with a combination of hot water and meat tenderizer.

    • The tenderizer is known to break up clogs.

    Ask FixBot

    Add Comment

  7. How to Unclog a Feeding Tube: step 7, image 1 of 1
    • Pulsate. Pulsate the 10ml plunger once again, in a quick motion.

    Ask FixBot

    Add Comment

  8. How to Unclog a Feeding Tube: step 8, image 1 of 1
    • Flush Coca-Cola. If your tube is still clogged, fill your 10ml plunger (and extension tubing, if applicable) with Coca-Cola. Flush your tube.

    • Regular coke is the best for breaking up clogs due to its carbonation levels.

    Ask FixBot

    Add Comment

  9. How to Unclog a Feeding Tube: step 9, image 1 of 1
    • Pulsate, then let Coca-Cola sit. Pulsate the 10ml plunger once again, in a quick motion. If the clog persists, allow the Coke to sit in your tube.

    • You may leave the Coke in your tube for up to one hour.

    Ask FixBot

    Add Comment

  10. How to Unclog a Feeding Tube: step 10, image 1 of 1
    • Test your feeding tube. It should flush easily.

    Ask FixBot

    Add Comment

Conclusion

The hope is to successfully unclog the feeding tube at home. Of course, always contact your health care physician in times of concern.

Cancel: I did not complete this guide.

5 other people completed this guide.

4 Guide Comments

That is a very good, clear procedure to follow. Those steps are essentially what they might trying the ER. If these steps don't work, the tube probably needs to be replaced.

Sue S.S. - Reply Share

This is so clear and helpful. There’s so little available for us tube feeders and this is a great. The Coke tip is fab. You can also use lemonade or any carbonated drink. The main thing to do is not panic, take your time and once the tube is clear , flush well with water.

Michelle - Reply Share

I have tried time and time again to unclog my tupe unsuslectfully.hl

Have been told NOT TO USE COKE

Gerald Lacey - Reply Share

I have tried warm water

Gerald Lacey - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 10

Past 7 Days: 42

Past 30 Days: 229

All Time: 22,506